elco Firebird FB 4 R LN - Replacing the coil

MAINTENANCE
46/56
EN
A-A 1 : 1
=
A
A
Fig. 45
6.4.5 Replacing the coil
The pump coil is designed and built to withstand temperatures of up to 85°C. In the event of
malfunctions or faults, replace the coil using the following procedure:
– remove the connector (1)
– remove the nut (2) using the key supplied
– slide off the coil (3) and replace it
1
2 3
Fig. 46
– ret the components, reversing the procedure above.