Elcometer 1535 - Other Tools

8

3.3 Other tools
To order any of these scratching tools for your Elcometer 1535, see “Spare
parts and accessories” on page 22.
Tool type Part number
Cut
(mm)
Coating
thickness
(µm/mils)
Maximum tool
pressure
(bar/psi)
Cross cut (Hardened
stainless steel)
KT001542P001 6 x 1
0 to 60/
0 to 1
KT001542P002 6 x 2
60 to 120/
1 to 5
KT001542P003 6 x 3
120 to 250/
5 to 10
Round point
(Tungsten carbide)
KT003092P001 0.5 0.8 / 12
KT003092P002 0.75 2 / 30
KT003092P003 1 4 / 60
Coin scratch disc
(Hardened steel)
KT001538N008
Op_1535_01 A5.fm Page 8 Wednesday, August 8, 2007 3:59 PM