22
11 SPARE PARTS AND ACCESSORIES
The Elcometer 1535 Multi Function Scratch Tester is complete with all the items
required to get started and take readings.
The following spare parts and optional accessories are available from your local
supplier or direct from Elcometer:
Item description Sales Part Number
Vacuum table (for non-ferrous specimens) KT001535N007
DIN tool, Negative rake, 1 mm (2 cutting edges) KT001535N001
DIN tool, Negative rake, 0.5 mm (2 cutting edges) KT001535N002
DIN tool, Normal rake, 1 mm (2 cutting edges) KT001538N001
DIN tool, Normal rake, 0.5 mm (2 cutting edges) KT001538N002
DIN tool, Positive rake, 1 mm (2 cutting edges) KT001535N009
DIN tool, Positive rake, 0.5 mm (2 cutting edges) KT001535N010
Tool holder (for cross cut tool) KT001535N004
Cross cut tool, 6 x 1 mm (8 cutting edges) KT001542P001
Cross cut tool, 6 x 2 mm (8 cutting edges) KT001542P002
Cross cut tool, 6 x 3 mm (8 cutting edges) KT001542P003
Tool holder (for round point carbide tool) KT001535N003
Round point carbide tool, 0.5 mm KT003092P001
Round point carbide tool, 0.75 mm KT003092P002
Round point carbide tool, 1.0 mm KT003092P003
Tool holder (for coin scratch disc tool) KT001535N005
Coin scratch disc, hardened steel, pack of 100 KT001535N008
10x magnifier KT003025P007
ASTM normalised adhesive tape, 1 roll K0001539M001
ISO normalised adhesive tape, 1 roll K0001539M002
DIN normalised brush KT001546N001
Op_1535_01 A5.fm Page 22 Wednesday, August 8, 2007 3:59 PM
To Next Page
Loading...
