Elcon Models - © 2010 43
7 Wheels and tyres (50400)
• Press the reinforcement ring on the rim.
• Place the inlay into the tyre.
• Place tyre with inlay on the rim, pay attention to place tyres correctly in order to have equal
sets after glueing (tyres have an a-symmetric design).
• Glue tyre into the groove, exersize care when glueing, only glue in a well ventilated room or
outside.
• Mount tyre onto the car, at the rear pay attention the pins are sitting correctly in the foreseen
holes in the rim.
To Next Page
Loading...