Elcon CLEON MMX - 9 Optional Parts; Stabi Bar Front; Stabi Bar Rear

Elcon Models - © 2010 45
9 Optional parts
9.1 Stabi bar front
9.2 Stabi bar rear
• Place delrin stabi mounts around the stabi bar.
• Assemble stabi mounts onto the front A-axle mount.
• Place ball joint around stabi bar.
• Mount ball joint to lower wishbone with bolt.
• Place delrin stabi mounts around the stabi bar.
• Assemble stabi mounts onto the dif mounts.
• Place ball joint around stabi bar.
•
Mount ball joint to lower wishbone with bolt.