Prior to operating your air
conditioner, make sure that:
USE OF WIRELESS REMOTE CONTROL
PRIOR TO
OPERATION
WIRELESS REMOTE
CONTROL PUTS ALL
FUNCTIONS AT YOUR
FINGERTIPS
Use the remote control holder
when unit is not in use.
Remote control can be slipped
in or out its holder.
● Aim at the infrared signal receiver on the room air conditioner when operating.
● The remote control signal can be received at a distance of up to about 8 m.
● Ensure that there is nothing between the remote control and the signal receptor.
● Do not drop or throw the remote control.
● Do not place the remote control in a location exposed to direct sunlight, or next to a
heating unit, and/or other heat source.
● Do not expose the air conditioner signal receiver to a strong light such as fluorescent
lamp or sunlight.
REMOTE CONTROL BATTERY CHANGE
Remove the batteries from the remote control as shown.
Use two 1.5 volt size AAA batteries.
For protecting the environment please return used batteries for recycling process.
● The red tab protecting the
remote control batteries has
been removed.
REMOTE
CONTROL
HOLDER
● For clock setting see page 8.
English 5
●
●
●
●
Do not charge batteries which are not rechargeable.
To Next Page
Loading...
