Always use the support of a large radius
cylinder for banding the tubes, using pipe
bending tools
Do not leave nuts of gas tubes
uncovered
Do not untie gas tubes after installation
Avoid placing the indoor unit near water
or oily mist.
Making of a water trap (Siphon)
will prevent bad odors and assure
proper drainage.
Avoid pipes bending and
keep pipes as short as possible.
GENERAL PRECAUTIONS
5
Tighten electrical circuits cables
5m
5m
Oil trap for units up to 5Kw.
In case the outdoor unit is under
the indoor unit no trap is required
To Next Page
Loading...
