OPERATING TIPS
Set a suitable room temperature; excessively low room temperature is not good for your health and wastes
electricity. Avoid frequent setting of the temperature.
During cooling, avoid direct sun into the room and keep curtains closed. Close doors and windows to keep
the cool air in the room.
Avoid using heater while the air conditioner in cooling mode.
Please make sure air lead blades on the unit are in appropriate angle: in cooling mode, air should flow in
horizontal direction, in heating mode in vertical downward direction.
Keep room temperature evenly through adjusting vertical air blades.
During prolonged operation, ventilate the room by opening windows.
After power failure, microprocessor will keep memory. Operation of the unit will be resumed in the last mode
of operation once start again.
After turning on, allow more than 3 minutes for cooling, heating or dry operation to start.
When dry mode is used, make sure that the room temperature is between 20 to 27 C. When used out of this
range, the unit may protect itself and become inoperative.
If the conditioner is used for a prolonged time in high humidity (relative humidity is above 78%) environment,
moisture may form on the air outlets and drip down.
o
To Next Page
Loading...
