Electro-Voice ZLX Series - Page 23

ZLX Powered Loudspeaker Series Amplifier DSP | en 23
Electro-Voice Installation manual 2018.04 | 01 | F.01U.349.854
The default is OFF.
RESET Menu
The Reset menu is used to reset the loudspeaker to original factory settings. Available options
for this selection are: NO or YES.
The default is NO.
To reset the system to original factory settings, do the following:
1. From the DSP menu, select RESET.
The reset are you sure message appears.
2. Select YES.
The loudspeaker restarts and resets the system to the original factory settings.
Notice!
Performing a reset erases the user customized settings saved under the STORE menu.
The five user customized settings in the STORE and RECALL menus return to <EMPTY>.
INFO Menu
The Information menu is used to display the product name and firmware version.