26 en | Recommended configuration ZLX Powered Loudspeaker Series
2018.04 | 01 | F.01U.349.854 Installation manual Electro-Voice
5.3 Using full-range systems as monitors
LINE and MIC input level control is available for both INPUT 1 and INPUT 2. The 12 o’clock
position is unity gain (no gain or attenuation) and the range to the right of zero (0) is for
adjusting microphone levels.
Notice!
The direction of the arrow indicates the signal path.
Mode: Live
Location: Monitor
Sub: Off
Tab.5.4: DSP settings loudspeakers as monitors
See also
– Floor monitor, page 13
– Amplifier DSP, page 15
To Next Page
Loading...
