1.4.2 Level #2 Password (OEM/Experimental):
The Level #2 password is for the Factory, OEM’s, Certied Installers, or experimental users. This
password allows access to all System Conguration Data. For a non-certied MVP, the password is
“100.” For a certied unit the password is only released under a contract or agreement.
The password protects the MVP from unauthorized access to calibration data. If calibration data is
improperly changed, it could lead to engine or aircraft damage and/or personal injury. Once the unit is
installed and checked out, this password should be changed (on either the certied or non-certied unit) to
a unique number and should be protected from unauthorized access.
6
To Next Page
Loading...
Need help?
General
