Elektro-Automatik PS 8000 DT Series Manual

23
Instruction Manual
PS 8000 DT Series
EN
Date: 04-22-2011
General
About
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-33
41747 Viersen
Germany
Phone: +49 2162 / 37850
Fax: +49 2162 / 16230
Web: www.elektroautomatik.de
Mail: ea1974@elektroautomatik.de
© Elektro-Automatik
Reprint, duplication or partly, wrong use of this instruction
manual are prohibited and might be followed by legal con-
sequences.
Safetyinstructions
Dangerousvoltage
Caution: The output voltage can rise to dangerous levels (>
60 VDC)!
All live parts have to be covered. All actions at the output termi-
nals have to be done while the unit is switched off from the mains
(mains switch OFF) and may only be executed by personnel
which is instructed about the hazards of electrical current. Any
connection between the load and the unit (at the output terminals)
have to be scoop-proof. Applications connected to the power
output must be congured and fused in a way that prevents the
use of these to cause a damage or worse to the unit by overload
or malfunction.
Important!Keepinmind!
• Only operate the unit at the voltage stipulated on the type plate
• Never insert mechanical parts, especially from metal, into the
unit, there is risk of an electrical shock and the unit might get
damaged
• Avoid the use or presence of liquids in the proximity of the unit,
the liquid might get into the unit and cause damage
• Never touch the contacts of the mains plug at the mains cord
directly after unplugging it from the mains socket, because there
is risk of an electrical shock
• Never connect loads, especially ones with low resistance, to
the unit while the power output is switched on, because it can
cause sparks which might damage the unit and injure the hands
• In order to equip interface cards into the slots on rear, the
common ESD regulations have to be followed
• The interface card may only be plugged and unplugged while
the unit is completely switched off (mains switch OFF)
• Aging of the device, as well heavy use may result in unpre-
dictable behaviour of control elements like pushbuttons and
rotary knobs.

Elektro-Automatik PS 8000 DT Series Specifications

General

Brand	Elektro-Automatik
Model	PS 8000 DT Series
Category	Power Supply
Language	English