Why is my Element LED TV showing horizontal or vertical bars, or the picture is shaking?
If you see horizontal or vertical bars or the picture is shaking on your Element LED TV, check for local interference from electrical appliances or power tools.
What to do if my Element TV has no sound?
If your Element TV has no sound, first ensure that the sound isn't muted. If it is, turn the mute function off. Also, check the volume settings to make sure the volume isn't set too low. If you are using external leads, verify that they are properly connected.
What to do if my Element TV remote control does not work?
If the remote control for your Element TV isn't working, check for any obstructions between the remote and the TV. Ensure the batteries are installed with the correct polarity (+/-). Also, verify that the correct remote operating mode is set (TV, VCR, etc.). If these steps don't work, try installing new batteries.
What to do if there is no output from one of the speakers on my Element TV?
If there's no output from one of the speakers on your Element TV, adjust the balance in the Menu option.
What to do if there is no output from one of the speakers on Element LED TV?
If there is no output from one of the speakers on your Element LED TV, adjust the balance in the Menu option.
Why does the picture appear slowly after switching on my Element LED TV?
This is normal; the image is muted during the product start-up process. Please contact a service provider if the picture has not appeared after 5 minutes.
What to do if my Element TV power suddenly turns off?
If your Element TV power suddenly turns off, check if the sleep timer is set. Also, check the power connection to ensure power hasn't been interrupted. It's also possible there's no broadcast on the tuned station.
Why does my Element TV say the signal is out of range?
If your Element TV displays 'The signal is out of range', adjust the resolution, horizontal, or vertical frequency. Check whether the signal cable is connected or loose. Also, check the input source.
What does 'The signal is out of range' mean on my Element E4SFT551 LED TV?
If your Element LED TV displays 'The signal is out of range,' adjust the resolution, horizontal, or vertical frequency. Check whether the signal cable is connected or loose and verify the input source.
How to fix noisy picture on Element E4SFT551?
If your Element LED TV picture is noisy, snowy, or ghosting, and you're using an indoor antenna, try adjusting the antenna position. Also, check the antenna connections.
To Next Page
General
