How to fix vertical bar on Element E4SFT551?
To fix a vertical bar or strip on the background, horizontal noise, and an incorrect position on your Element LED TV, set the auto or adjust clock, phase, or H/V position.
Why is my Element LED TV showing horizontal or vertical bars, or the picture is shaking?
If you see horizontal or vertical bars or the picture is shaking on your Element LED TV, check for local interference from electrical appliances or power tools.
How to fix noisy picture on Element E4SFT551?
If your Element LED TV picture is noisy, snowy, or ghosting, and you're using an indoor antenna, try adjusting the antenna position. Also, check the antenna connections.
Why is the screen color unstable or a single color on my Element TV?
If the screen color on your Element TV is unstable or a single color, check the signal cable. You may also need to reinstall the PC video card.
How to fix vertical bar or strip on the background of Element E4SFT551?
If you observe a vertical bar or strip on the background, horizontal noise, or an incorrect position on your Element LED TV, set the auto configure or adjust clock, phase, or H/V position.
Why does the picture appear slowly after switching on my Element LED TV?
This is normal; the image is muted during the product start-up process. Please contact a service provider if the picture has not appeared after 5 minutes.
What to do if there is no output from one of the speakers on my Element TV?
If there's no output from one of the speakers on your Element TV, adjust the balance in the Menu option.
What to do if my Element E4SFT551 has no sound and picture?
If your Element LED TV has no sound and picture, check that the main plug is connected to a wall outlet and that you have pressed the POWER button on the front of the TV. Also, check the picture contrast and brightness settings.
Why is there no sound on my Element E4SFT551?
If there is no sound on your Element LED TV, there might be several reasons. First, check if the sound is muted and turn mute off. Second, verify the volume settings to ensure the volume isn't set too low. Finally, if you're using external leads, make sure they are connected properly.
What to do if my Element TV remote control does not work?
If the remote control for your Element TV isn't working, check for any obstructions between the remote and the TV. Ensure the batteries are installed with the correct polarity (+/-). Also, verify that the correct remote operating mode is set (TV, VCR, etc.). If these steps don't work, try installing new batteries.
To Next Page
General
