42
English
To ensure that the hoisting straps have been attached correctly, please see the below examples.
• Before lifting the machine, the engine must always be turned off.
• Ensure that the four M10 bolts that attach the hoisting rings to the machine are not loose
(2 x 17 mm wrench).
• Insert the hook into the hoisting ring. Choose a hook that is large enough to securely close
after it has been inserted through the hoisting ring. Ensure that the hoisting strap to be used
is not damaged. Slide the hoisting strap through the hoisting ring. Avoid twisting the hoisting
strap.
Caution: Check the machine's identification label to find out its weight. Ensure
that the hoist to be used can handle the weight of the machine. Only hoisting
elements (chains, ropes, straps...) that have a recent certificate of inspection are
to be used.
• The positioning of the hoisting rings is such that the machine will remain level as it is being
lifted. Additional weight should never be added to the machine, either by placing objects into
the hopper or attaching them to the machine.
To Next Page
Loading...
