84
English
17.3. Error identification
The engine does not start: the engine does not run
• Battery voltage too low
• Service hatch not closed properly
• Blown fuse
• Blade shaft or turbine fan blocked
• Electrical circuit not properly protected
The engine does not start: the starter engages, but the engine does not start
• Lack of oil
• Lack of fuel
• Incorrect fuel
• Spark plug broken or faulty ignition
• Battery voltage too low
• Defective engine
Machine turns off while operating:
• Overload, shaft obstruction
• Lack of fuel
• Lack of oil
• Rear hatch not properly closed
• Engine defect
• Electrical circuit not properly protected
Loss of power / Diminished shredder performance
• Lack of fuel
• Fuel supply blocked
• Low-grade fuel
• Dirty air filter
• Blunt blades
• Blow chute or shredding chamber blocked
• Engine speed too low
• ABM sensor defect or malfunction
• Defect in the electrical system of the ABM system
• Solenoid valve problem (ABM)
• Battery voltage too low
• Carburettor failure
• Incorrect belt tension
• The feed roller does not go down to the lowest position.
To Next Page
Loading...
