Eliet Prof 6 - Replacing the Air Filter; Changing the Engine Fuel Filter; Refilling the Hydraulic Fluid

58
English
11.4.4. Replacing the air filter
This operation is almost identical to cleaning the air filter. (see Section 11.4.3, page 57) The only
difference is that the cartridge is replaced.
New air filters of the correct type are available from your ELIET dealer or from other authorised
dealers.
11.4.5. Changing the engine fuel filter
• Switch off the engine and remove the ignition key.
Warning: Allow the engine to cool down completely. This will help prevent any
risk of fire or explosion.
• Loosen the clamps (1) using universal pliers.
• Remove the filter from between the fuel lines.
• Insert the new filter (making sure to insert it
with the arrow on the filter in the correct direc-
tion). New filters are available from your ELIET
dealer. Order code: BM 260 493 629
• Slide the clamps onto the section of the fuel
hose that rests on the filter.
• Retighten the clamps.
• Wipe off any spilled petrol (UK)/ gas (USA).
• Start the engine and inspect for signs of lea-
kage.
11.4.6. Refilling the hydraulic fluid
• Make sure that the engine is on a horizontal surface.
For your information: While changing the oil during maintenance, it is impor-
tant to also change the oil filter.
Ensure that you have a 12 litres - 3.5 US gallon receptacle and a funnel on hand.
• Unscrew the fuel filler cap to allow air to enter.
• Place the funnel below the oil filler plug and remove the filter.
• Allow the oil to flow into the receptacle through the funnel.
• Place a new oil filter into the fixture. See “11.4.7. Changing the hydraulic fluid filter”, page 59.
1