45
English
• Never leave the engine running for more than 30 seconds in a tight or enclosed space, for
example, inside a van, etc. Make sure that the work area has been prepared in advance in order
to set the machine into position quickly.
• Make sure that the machine is properly secured to the vehicle during transport. Use the 4
eyelets of the frame (2 each side) to attach ropes or straps. Four eyelets are provided in order
to attach hooks.
• Always engage the parking brake on the machine.
• Do not forget that the machine has a high centre of gravity. Use straps to secure both sides of
the machine to the vehicle. This ensures that the machine will not topple over when the vehicle
goes around a bend.
• Do not overload the vehicle. Read “15. Equipment specifications”, page 80 for the exact
weight of the shredder.
Warning: Under no circumstances should the machine be used if the blow chute
is still in the transport position. The wood chips could be blown out in the direc-
tion of the operator and cause serious injury.
To Next Page
Loading...
