Elmo EV-2000AF - 3 Setting up

10
3. SETTING UP
(1) Raise the column.
Raise up the column once, and fall it until it is
locked.
Note: The lighting arm (L) cannot be
independently raised.
Note: Unless the column is fully raised up, it may
not be locked when it is fallen.
(2) Raise the lighting arm (R) unit, and turn the camera
head to direct the lens unit to the stage.
(3) Turn the lighting unit.
(5) Plug the power cord into the power cord receptacle
of the Presenter and the the AC outlet.
(4) Open the lighting arm unit and the lighting unit.