53
q
e
w
r
Corded Buttonhole
Machine settings
q Pattern: MODE 1: 29
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
Place the button on the button holder on the buttonhole
foot.
Hook a ller cord on the spur on the front of the foot.
Bring the ends of cord toward the back and under the
foot.
Bring up the ends of the cord and insert both ends
between the ribs and metal plate.
q S p u r
w Metal plate
To sew a corded buttonhole, follow the same procedure
as a square buttonhole.
Lower the needle into the fabric where the buttonhole will
start.
Lower the foot and buttonhole lever.
Pull the needle thread lightly to the left.
Start the machine to sew the buttonhole over the cord.
The machine stops automatically when nished.
Remove the fabric from the machine.
Cut the ller cord at both ends.
To cut the buttonhole opening, refer to page 49.
NOTE:
Set the stitch width in accordance with the thickness
of ller cord used.
w
q
To Next Page
Loading...
