64
Fagoting
Machine settings
q Pattern: MODE 1: 58
w Thread tension: AUTO
e Presser foot: Satin stitch foot F
r Foot pressure: 5
* Stitch patterns (mode 1) (mode 2) can also be
used.
q
e
w
r
Use this stitch to join two pieces of fabric to create an
open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and press.
Pin the two edges to paper or tear away backing 0.5 cm
(3/16˝) apart.
q 0.5 cm (3/16˝)
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After nishing sewing, tear away the paper.
Scallop
Machine settings
q Pattern: MODE 1: 66
w Thread tension: AUTO
e Presser foot: Zigzag foot A
r Foot pressure: 5
* Stitch pattern (mode 1) can also be used.
q
e
w
r
Sew scallops 1 cm (3/8˝) from the fabric edge.
Trim the allowance close to the stitches.
Make sure not to cut the stitches.
q
French Knots
Machine settings
q Pattern: MODE 2: 43
w Thread tension: 5−8
e Presser foot: Satin stitch foot F
r Foot pressure: 5
Tighten the thread tension to 5-8 when sewing.
q
e
w
r
To Next Page
Loading...
