6
Extension Table
The extension table provides an extended sewing area
and can be removed for free-arm sewing.
q Extension table
w Free-arm
To detach:
Draw the table out to the left.
To attach:
Slide the table on the base and push the table to the
right.
w
w
q
Extra Wide Table
CAUTION:
Do not use the Extra Wide Table as an ironing table
or for purposes other than explained in this manual.
Doing so may cause damage or injury.
Assembling the wide table:
z Peel off the backing paper from the rubber soles and
attach to the bottom of the legs.
q Rubber sole
w Leg
x Attach the 4 legs to the table top with the setscrew.
e Setscrew
c Attach the table support to the underside of the table
by inserting the hooks into the slots.
r Table support
v Remove the extension table.
Place the assembled table on the machine.
Adjust the height of the table top by turning the
adjusting screw.
t Adjusting screw
Free-arm sewing
Free-arm sewing is used for stitching sleeves,
waistbands, pant legs or any other tubular garments.
It is also useful for darning socks or mending knees or
elbows.
w Free-arm
q
w
e
r
t
z x c
v
To Next Page
Loading...
