Elstat ems25 Series User Manual

www.elstat.io
34
7.5 How to view the ems25+ parameter settings(PS)
View the parameter settings tocheck the values of the parameters as follows:
STEP IMAGE
1
Press and hold the set button until PAS is displayed
2
Enter the button sequence of the password.
3
Ensure that PS is displayed.
4
Press and hold the set button to view the parameter name and value alternatively.
5
Keep the set button pressed to scroll through the parameter settings.
See “Celsius or Fahrenheit (CF)” See “Defrost Duration (DD)”
See “Set Point (SPS or SPF)”
See “Display Stability (d2)”
See “Buzzer Enable (b0)”
See “Differential (dIF)” See “Buzzer Duration (b1)”
See “Calibration 1 (CA1)” See “Alarm Delay (Ad)”
See “Saving Set Point (SSP)” See “Alarm Frequency (AF)”
See “Saving Differential (Sd)” See “Motion sensor enable (Sn)”

Elstat ems25 Series Specifications

General

Brand	Elstat
Model	ems25 Series
Category	Control Systems
Language	English