Elstat ems25 Series User Manual

www.elstat.io
60
7. On the parameter loader, click the Edit Com port settings to display the dialog box below
8. Set the parameters to the values of the USB serial port of the local computer. For example:
9. Click OK
PARAMETER VALUE
COM port COM port allocated to the cradle, For example, 3.
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None

Elstat ems25 Series Specifications

General

Brand	Elstat
Model	ems25 Series
Category	Control Systems
Language	English