Jumpers
Jumpers
User's Manual
BAB 740
5—6
5.2.1 PMCE-740 User-settable Jumpers
Table 28: PMC Slot 1 PCIREQ and PCIGNT Routing
J201 J202 Description
1-2 1-2 Use PCIREQ, PCIGNT of PMC Slot 0
3-4 3-4 Use PCIREQ, PCIGNT of BAB 740 Onboard SCSI Controller
Warning: PCIREQ and PCIGNT of PMC Slot 0 or SCSI
Controller can only be used, if the corresponding device is
not equipped!
Table 29: PMC Slot 1 Interrupt Routing
J204 Description
1-2 Route PMC IRQ A to PCI IRQ A
3-4 Route PMC IRQ A to PCI IRQ B
5-6 Route PMC IRQ A to PCI IRQ C
7-8 Route PMC IRQ A to PCI IRQ D
To Next Page
Loading...