Booting
Booting User's Manual
BAB 740
6—3
6.2.3 Ethernet Boot Printout
If a BOOTP server is available in the local network and the BAB
740 is known by this server, the BAB 740 will boot over Ethernet
after entering ‚eb‘ at the boot menu prompt.
Note: The BOOTP server must send the response directly to the BAB
740. Broadcasts will not be analyzed by the BAB 740 in this case.
Select a boot method from the above menu: eb
Bootp: sending bootp request for Address 00:00:5b:00:37:39
Bootp: Got Response from server: c2.00.00.38
My IP Address will be: c2.00.00.b8
My Bootfile is: /tftpboot/B740/os9boot
Bootp: My bootfile size is: 00000cc3 (512-byte) blocks
My subnet mask is: ff.ff.ff.00 <<no timeoffset tag>>
Tftp: Sending tftp Request...
................................................................
o
o
o
.................................................................
.................................................................
Tftp: received file with 0019840c bytes
Bootfile received from server c2.00.00.38
Now searching for an OS-9000 Kernel...
A valid OS-9000 bootfile was found.
[1]$
After the boot file is transferred, OS-9 is booting.
To Next Page
Loading...