MES1000, MES2000 Ethernet Switches 119
EXEC mode commands
Command line request in EXEC mode appears as follows:
console>
Table 5.119 —EXEC mode commands
show mac address-table
[dynamic | static| secure]
[vlan vlan_id] [interface
{gigabitethernet gi_port |
fastethernet fa_port |port-
channel group] [address
mac_address]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8);
vlan_id: (1..4094)
Show MAC address table for the selected interface or for all
interfaces.
- dynamic—show dynamic records only
- static—show static records only
- secure—show secure records only
show mac address-table
count
[vlan vlan | interface
{gigabitethernet gi_port |
fastethernet fa_port |port-
channel group} ]]
Show record quantity in MAC address table for the selected
interface or for all interfaces.
show bridge multicast
address-table [vlan
vlan_id] [address
{mac_multicast_address |
ipv4_multicast_address |
ipv6_multicast_address }]
[format {ip | mac}]
[source
{ipv4-source-address|
ipv6_multicast_address } ]
Show multicast address table for the selected interface or for
all VLAN interfaces (this command is available to privileged
users only).
- ip—show by IP addresses
- mac—show by MAC addresses
show bridge multicast
address-table static
[vlan vlan_id] [address
mac_multicast_address |
ipv4_multicast_address |
ipv6_multicast_address ]
[source ipv4-source-address
| ipv6_multicast_address ]
[all | mac | ip]
Show static multicast address table for the selected interface
or for all VLAN interfaces.
show bridge multicast
filtering vlan_id
Show multicast address filter configuration for the selected
VLAN.
show bridge multicast
unregistered
[gigabitethernet gi_port |
fastethernet fa_port |port-
channel group]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
Show filter configuration for unregistered multicast addresses.
show bridge multicast
mode [vlan vlan_id]
Show multicast addressing mode for the selected interface or
for all VLAN interfaces.
show bridge multicast
reserved-addresses
Show rules defined for multicast
reserved addresses.
show mac address-table
mode
View the current hash length in the MAC address table.