ELTEX MES1000 User Manual

MES1000, MES2000 Ethernet Switches 121
vlan_id static ip_address
[interface
{ gigabitethernet gi_port |
fastethernet fa_port |port-
channel group}]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
and statically add group interfaces for the current VLAN.
- ip_ address—multicast IP address
Interface listing should be delimited with '–' and ','.
no ip igmp snooping vlan
vlan_id static ip_address
[interface
{ gigabitethernet gi_port |
fastethernet fa_port |port-
channel group}]
Remove multicast IP address from the table.
ip igmp snooping vlan
vlan_id mrouter learn
pim-dvmrp
vlan_id: (1-4094)
Enabled by default.
Enable automatic port identification with connected multicast
routers for the current VLAN group.
no ip igmp snooping vlan
vlan_id mrouter learn
pim-dvmrp
Disable automatic port identification with connected multicast
routers for the current VLAN group.
ip igmp snooping vlan
vlan_id mrouter interface {
gigabitethernet gi_port |
fastethernet fa_port |port-
channel group}
vlan_id: (1-4094)
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
Define the port with connected multicast router for the
selected VLAN.
no ip igmp snooping vlan
vlan_id mrouter interface {
gigabitethernet gi_port |
fastethernet fa_port |port-
channel group}
Multicast router is not connected to the port.
ip igmp snooping vlan
vlan_id forbidden mrouter
interface
{ gigabitethernet gi_port |
fastethernet fa_port |port-
channel group}
vlan_id: (1-4094)
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24);
group: (1..8)
Do not identify the port (static, dynamic) as a port with
connected multicast router.
no ip igmp snooping vlan
vlan_id forbidden mrouter
interface
{ gigabitethernet gi_port |
fastethernet fa_port |port-
channel group}
Identify the port as a port with connected multicast router.
ip igmp snooping vlan
vlan_id replace source-ip
ip_address
vlan_id: (1..4094)
Replaces source IP address with specified IP address in all
IGMP report packets of the specified VLAN.
no ip igmp snooping vlan
vlan_id replace source-ip
Disables replacement of source IP address with specified IP
address in all IGMP report packets of the specified VLAN.
ip igmp snooping map cpe
vlan cpe_vlan_id
multicast-tv vlan
mc_vlan_id
cpe_vlan_id: {1..4094};
mc_vlan_id: {1..4094}
Add the match between the user VLAN (cpe_vlan_id) and the
multicast VLAN (mc_vlan_id).
If IGMP message comes to a port with cpe_vlan_id tag and the
'cpe_vlan_id / mc_vlan_id' match exists, IGMP message will be
retranslated to the mc_vlan_id.
no ip igmp snooping map
cpe vlan cpe_vlan_id
Disable the Multicast-TV VLAN mode for the specific VLAN.
ip igmp snooping
vlan vlan_id querier
vlan_id: (1..4094)
Enable igmp-query generation by the switch in the current
VLAN.
By default, the query generation is disabled.
no ip igmp snooping
vlan vlan_id querier
Restore the default value.
ip igmp snooping
vlan vlan_id querier
version {2 | 3}
vlan_id: (1..4094)
Set IGMP version for IGMP query generation.
no ip igmp snooping vlan
vlan_id querier version
Restore the default value.
ip igmp snooping vlan
vlan_id querier address
vlan_id: (1..4094)
Define the source IP address for IGMP querier.

ELTEX MES1000 Specifications

General

Brand	ELTEX
Model	MES1000
Category	Switch
Language	English