EasyManuals Logo

ELTEX MES1000 User Manual

ELTEX MES1000
231 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
134 MES1000, MES2000 Ethernet Switches
radius-server source-ipv6
ip_address
-
Define the specific IPv6 address used as the default source
address being sent in RADIUS protocol messages.
no radius-server source-ipv6
[ip_address]
Remove the specific IPv6 address used as the default source
address being sent in RADIUS protocol messages. Define IPv6
switch interface address as the source address for RADIUS
protocol messages.
radius-server attributes nas-id
include-in-access-req format
nas-id
nas-id (1..32)/ attribute
32 is absent from
requests by default
Adding attribute 32 (NAS-ID) to Radius-request packets.
- nas-id: option format
- %h macro substitutes hostname of the switch.
no radius-server attributes
nas-id include-in-access-req
format
Returns the default value.
Privileged EXEC mode commands
Command line request in Privileged EXEC mode appears as follows:
console#
Table 5.142 Privileged EXEC mode commands
Command
Action
show radius-servers
Show RADIUS server configuration parameters (this command is available to privileged users
only).
show radius statistics
Show Radius protocol statistics.
Example use of commands
Set global values for parameters: server reply interval5 seconds, RADIUS server discovery
attempts5, time when unavailable servers will not be polled by the switch RADIUS client10
minutes, secret keysecret. Add RADIUS server into the list, located in the network node with IP
address 192.168.16.3, server authentication port1645, server access attempts2.
console# configure
console (config)# radius-server timeout 5
console (config)# radius-server retransmit 5
console (config)# radius-server deadtime 10
console (config)# radius-server key secret
console (config)# radius-server host 196.168.16.3 auth-port 1645
retransmit 2
Show RADIUS server configuration parameters
console# show radius-servers
start
IP address Port port Tim Ret- Dead- source IP Prio. Usage
Auth Acct Out rans Time
------------- ----- ----- ------ ----- ------ ---------- ----- ----
192.168.16.3 1645 1813 Global 2 Global Global 0 all
196.168.16.3 1645 1813 Global 2 Global Global 0 all
Global values
--------------
TimeOut : 5
Retransmit : 5
Deadtime : 10
Source IP : 0.0.0.0
Source IPv6 : ::

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX MES1000 and is the answer not in the manual?

ELTEX MES1000 Specifications

General IconGeneral
BrandELTEX
ModelMES1000
CategorySwitch
LanguageEnglish

Related product manuals