EM TEST AutoWave - Periodical Calibration; Output Channel Verification; Delivery Groups and Accessories; Basic Equipment and Options

EM TEST AutoWave
Manual for Operation V 5.9.1 38 / 45
6.3.
Calibration
For periodical calibration the AutoWave has to return back to the manufacturer
6.4.
Verification
A verification can be done with the following procedure:
Output channel
Setting a defined voltage to the output channel and verification with a DMM ( 5½ digit )
Measuring: 0.00V
5.00V
10.00V
7.
Delivery Groups
7.1.
Basic equipment
 Arbitrary generator type AutoWave
 Mains cable
 Calibration certificate
 Manual on USB memory stick
 Safety manual
7.2.
Accessories and options
7.2.1.
Extension Board
Extension Board
- 2 output channels 16 Bit CH3 , CH 4  10V
- 2 input channels 16 Bit  100V