EM TEST AutoWave
Manual for Operation V 5.9.1 41 / 45
After “download the AutoWave display shows
AutoWave REMOTE
AuitoWave.tgz stored
The message “File Stored” confirms the
successful download of the new firmware to
AutoWave.
3. Press the Reboot button for Booting the
AutoWave.
During the booting process the AutoWave
will install the new firmware version
A bar graph shows the booting progress.
After a successful update the actual firmware
of the AutoWave is displayed in the field
“Actual Firmware Version”.
4. Press the OK button to return to the
Device Setup Window.