x
DAE2P/DAE3P Hardware Reference
Preface
Related
documentation
EMC Rails and Enclosures (CX-Series Storage Systems) Field Installation
Guide (P/N 300-001-799)
EMC Rails and Enclosures (CX3-Series Storage Systems) Field Installation
Guide (P/N 300-003-630)
EMC Navisphere Manager Administrator’s Guide (P/N 300-003-511)
Planning your CX3-Series Fibre Channel Storage System Configuration
Available on EMC Powerlink
EMC Navisphere Security Administrator’s Guide (P/N 069001124)
EMC Installation Roadmap for CX3-Series, CX-Series, AX-Series, and
FC-Series Storage Systems (P/N 069001166)
EMC Storage Systems CX-Series Disk and FLARE OE Matrix
(P/N 014003111)
Conventions used in
this guide
EMC uses the following conventions for notes, cautions, warnings,
and danger notices.
A note presents information that is important, but not hazard-related.
CAUTION
A caution contains information essential to avoid data loss or
damage to the system or equipment. The caution may apply to
hardware or software.
WARNING
A warning contains information essential to avoid a hazard that can
cause severe personal injury, death, or substantial property damage
if you ignore the warning.
DANGER
A danger notice contains information essential to avoid a hazard
that will cause severe personal injury, death, or substantial property
damage if you ignore the message.
To Next Page
Loading...
Need help?
General
