EMC CLARiiON DAE2P - Plugging in the Power Cord

3-22
DAE2P/DAE3P Hardware Reference
Servicing a DAE2P/DAE3P
5. Plug the AC power cord into the new supply as shown in
Figure 3-18.
Figure 3-18 Plugging in the power cord
Make certain you secure the power cord with the retention bails at each
connector. The bails prevent the power cord from pulling out of the
connections.
!!
!!
!
EXP PRI
EXPPRI
#
!
EXP PRI
EXP
PRI
#
A
B
EMC3213
Generic
Plug
Retention Bail
Generic
Plug
Retention
Bail