EMC HD400 - Precious Metals; Plastic Part Markings

27
WEEE Disassembly Instructions for the
HD400 Disk Processor Enclosure
11.2 Precious Metals
Table 13 lists precious metals for recovery.
Table 13 Precious Metals on HD400 Components
11.3 Plastic Part Markings
Table 14 lists markings for plastic parts that weigh more than 25 grams.
Table 14 Plastic Part Markings on HD400 Components
Part Name
Weight
ISO 11469:2000 Marking
2.5-inch Hard Disk Drive (plastic filler inside 3.5-inch carrier)
141 g
>PC+20%GF<
2.5-inch Hard Disk Drive (plastic latch attached to 3.5-inch carrier)
34 g
>PC+ABS-FR(40)<
Three Fan Modules (in chassis)
137 g
>PC+ABS-FR(40)<
Fan Pack Assembly (in power supply)
282 g
>PC+ABS-FR(40)<
Material
Item
Location
Copper (Cu)
19
Power Supply
Coils
All PCBs (Circuit Etch)
Gold (Au)
Absent or not at an appreciable level
Palladium (Pd)
Absent or not at an appreciable level
Platinum (Pt)
Absent or not at an appreciable level
Silver (Ag)
Absent or not at an appreciable level