4
WEEE Disassembly Instructions for the
HD400 Disk Processor Enclosure
1.0 Document Purpose
This document provides the most accurate information available on the location and removal of
reportable materials as required by the European Union (EU) Waste Electrical and Electronic
Equipment (WEEE) Directive 2002/96/EC.
For more information on EMC’s environmental initiatives, policies, and goals go to:
http://www.emc.com/corporate/sustainability/index.htm
2.0 Important Notice
This document does not in any way replace disposal instructions in EMC contracts, or those
included in EMC Product and Residuals Disposal Guidelines.
3.0 How to Use these Instructions
EMC recommends that you adopt the following workflow to ensure the greatest efficiency in
compliance with WEEE legislation.
1. See 8.0 Product Photos to familiarize yourself with the hardware.
2. Review the items listed in 11.0 Reportable Materials on the HD400 Disk Processor
Enclosure, 11.1 Materials of Interest to Recyclers, and 11.2 Precious Metals to learn the
recyclable materials present in this product.
3. Review 12.0.2 Safety Precautions prior to disassembling the product.
4. Review 12.0 Disassembly Details for removal procedures.
4.0 Related Documentation
EMC provides separate WEEE disassembly instructions per product platform. Contact the
EMC WEEE administrator at ewaste@emc.com to request additional documentation as
required.
5.0 Brand Owner Identification
EMC Corporation
176 South Street
Hopkinton, Massachusetts 01748
U.S.A
http://www.emc.com
To Next Page
Loading...
Need help?
General
