EMC HD400 - Disassembling the HD400 Enclosure; Removing a Hard Disk Drive

29
WEEE Disassembly Instructions for the
HD400 Disk Processor Enclosure
12.0.3 Disassembling the HD400 Enclosure
Note: You must remove the enclosure from the cabinet to access internal components like hard
disk drives.
12.0.3.1 Removing a Hard Disk Drive
1. Remove the top cover.
2. Push the disk's orange release tab.
3. Lift the disk's latch and slowly remove the hard disk drive from its slot.
Figure 3. Removing a hard disk drive