EMC HD400 - Product Identification; Hd400 Dpe

7
WEEE Disassembly Instructions for the
HD400 Disk Processor Enclosure
7.0 Product Identification
7.0.1 HD400 DPE
Note: EMC uses the Product Regulatory Model Name (see first item in Table 2) as the main
identifier throughout this document. Locate the product regulatory model name on the Device
Rating Label (DRL) affixed to a rectangular recess on the top of the product chassis.
Table 2 Product Regulatory Model Name and Specifications
Product Regulatory Model Name
HD400
Product Description
4U, 60-slot Disk Processor Enclosure (DPE)
Part Number
900-569-002
Note: The part number cited denotes the
base chassis (includes midplane). Each
platform supports many different EMC
products. Contact your EMC Sales
Representative for product-specific part
numbers.
Dimensions
194.7 cm (H) x 76.7 cm (W) x 106.4 cm (D)
Mass
96.6 kg (based on a fully populated unit)