2
Reference Manual
00809-0200-4410, Rev BC
Introduction
July 2017
Introduction
1.1 Section outline
This manual will help to install, configure, operate, and maintain the Gateway.
Section 1: Introduction
This section introduces the product and describes what components may be found in the box. It also
includes details for services and support as well as return and disposal of the product.
Section 2: Initial Connection
This section describes how to connect to the Gateway for the first time and what settings should be
configured before placing it on a live control network. It is important to note that some Gateways are
used in stand-alone applications and do not reside on a network. In these cases, it is still important to
configure the items outlined in this section.
Section 3: Mounting and Connection
This section describes how to properly mount the Gateway and make electrical connections, including
electrical wiring, grounding, and host system connections. This section also describes how to mount the
optional remote antenna.
Section 4: Software Setup
This section describes the installation and setup of the optional software included with the Wireless
Gateway. This software will aid in secure host integration as well as wireless field device configuration.
Section 5: Host Integration
This section describes how to connect the Gateway to a host system and integrate data gathered from
the field device network. It covers network architectures, security, and data mapping.
Section 6: Troubleshooting
This section provides troubleshooting tips as well as information to contact technical support over the
phone or through email.
Section 7: Glossary
The glossary defines terms used throughout this manual or that appear in the web interface of the
Wireless Gateway.
Appendix A: Specifications and Reference Data and Appendix B: Product Certifications
The appendices provide additional and more specific information on a variety of subjects including
Product Specifications and Product Certifications.
1.2 Product recycling/disposal
Recycling of equipment and packaging should be taken into consideration and disposed of in accordance
with local and national legislation/regulations.
To Next Page
Loading...
Need help?
General
