Emerson 1410 - Power

20
Reference Manual
00809-0200-4410, Rev BC
Mounting and Connection
July 2017
Mounting and Connection
3.4.5 Power
The Gateway is designed to be powered by 24 VDC (nominal) Class 2 supply and requires
250 mA of current. The positive and negative connections are depicted on the diagram shown in Figure
3-6 on page 18.
The wiring should include an external power shut-off switch or circuit breaker that is located near the
Gateway.
Note
Using an uninterruptible power supply (UPS) is recommended to ensure availability should there be a
loss of power.