10
Reference Manual
00809-0200-4410, Rev BC
Initial Connection
July 2017
Initial Connection
To change the TCP/IP Network Settings:
1. Navigate to System Settings>Ethernet Communication.
2. Select Specify an IP address (recommended).
3. Enter the following:
Hostname
Domain Name
IP Address
Netmask
Gateway
4. Select Submit.
5. When prompted, select Restart Apps.
6. Select Yes to confirm restart.
7. Close the web browser.
Note
Once the IP Address of the Gateway has been changed, communications to the web interface will be lost.
Restart the web browser, then log back into the Gateway using the new IP address and other TCP/IP
network settings. The PC/Laptop TCP/IP network settings may need to be changed. During a Restart
Apps the wireless network will be temporarily lost.
2.3.4 System backup
The Gateway has a System Backup and Restore feature that saves all user-configured data. It is best
practice that a System Backup be performed periodically throughout the installation and configuration
process.
1. Navigate to System Settings>Gateway>Backup and Restore>Save.
2. Select Save Configuration.
3. The Gateway collects the configuration date and when the file download pop up appears, select Save.
4. Enter a save location and file name.
5. Select Save.
6. Select Return to form.
Note
System backup contains user passwords and keys used for encrypting communication. Store
downloaded system backups in a secure location.
2.3.5 Web page usage
It is not recommended that users stay logged on to a single page or a large number of users on multiple
pages for long periods of time. This additional loading can slow the flow of data. The Gateway by default
logs users out who are logged on for long periods of time with no activity.
To Next Page
Loading...
