Emerson Daniel 3410 Series Instructions For Use, Maintenance And Installation

Figure 3-34: Transmitter Electronics Enclosure removal
A. Transmitter electronics enclosure
B. Base enclosure bolts
C. Base enclosure
5. Use a 3 mm flat head screw driver and disconnect the Acquisition cable terminal
block and the transducer wire terminal blocks from the Acquisition Module inside of
the Base enclosure.
Maintenance and Troubleshooting manual Meter repairs
P/N 3-9000-769 June 2019
Maintenance and Troubleshooting manual 99

Emerson Daniel 3410 Series Specifications

General

Brand	Emerson
Model	Daniel 3410 Series
Category	Measuring Instruments
Language	English