Emerson Daniel 3414 - Page 58

42 Dry calibration
Section 5: Calibrate and configure the meter 3410 Series Gas Ultrasonic Meters Operations Manual
January 2018 3-9000-777 Rev E
Reverse A2 Data points affected:
• RevA2
Options:
• Enter a value (s/m or s/ft) within the range [-0.1,0.1 s/m].
Guidelines:
• This value should only be modified under direction of Daniel personnel.
Reverse A3 Data points affected:
• RevA3
Options:
• Enter a value (s
2
/m
2
or s
2
/ft
2
) within the range [-0.1,0.1 s
2
/m
2
].
Guidelines:
• This value should only be modified under direction of Daniel personnel.
Table 5-1 Data Points for dry calibration
Daniel MeterLink
Display Name
Data Points, Options and Guidelines