Model 3410 Ultrasonic Meter Acquisition Module WiringFigure 3-8:
3.5 Replace the meter electronics
The following procedure should be performed by a qualified service technician or trained
personnel. Observe all warning labels on the meter before starting this procedure.
The Daniel 3410 Series Gas Ultrasonic Flow Meter Transmitter Electronics Enclosure
consists of the following:
• CPU Module assembly (P/N 1-360-03-010)
• Optional I/O Module (RS-232 or RS-485)
• I.S. Barrier Board (P/N 360-03-004)
Meter repairs
Maintenance and Troubleshooting manual 31