Owner and operator manual Section 4: Orifice plate installation and removal instructions
3-9008-001 Rev M January 2015
“Extended time” procedure 81
continue to rotate the Upper Plate Carrier Shaft (7) until the Upper Plate Carrier Shaft
(7) gears and the Plate Carrier (8DM or 8DMC) gear rack ratchet.
Step 18
19. Remove the Orifice Plate Carrier (8DM or 8DMC) from the Top (14) and perform the
scheduled work on the Orifice Plate (13) and Orifice Plate Carrier (8DM or 8DMC).
20. Close the Bleeder Valve (10B) using the Operating Wrench (2).
To Next Page
Loading...
