1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10 IC200D 24/192
TO SEE THE OUTPUT PERCENTAGE:
Enter the function menu
1. Use the UP or DOWN keys to select Cond.
2. Push SET key: the bottom display shows Cnd1, the top display shows the output percentage.
3. Use the UP or DOWN keys to select Cnd1 or Cnd2, the top display always shows the value, between
0% and 100%, of the proportional output of the selected circuit.
4. To exit the Hour function push MENU key or wait the timeout.
9.14 VISUALIZATION OF CONDENSER FAN STEPS
Enter the function menu:
1. Use the UP or DOWN keys to select Cond.
2. Push SET key: the bottom display shows Cnd1, the top display shows the number of steps
3. Push UP or DOWN key to visualize the number of steps of the second circuit (if enabled)
4. To exit the Hour function push MENU key or wait the timeout.
9.15 READ-OUT OF THE PROPORTIONAL OUTPUT VALUE (OUTPUTS
OUT1...OUT3)
The three proportional outputs, 4..20ma or 0-10V, can be showed in the menu function.
Pout FUNCTION selects the proportional outputs.
IC200D outputs:
Pou1 Proportional OUT 1 value
Pou2 Proportional OUT 2 value
Pou3 Proportional OUT 3 value
ICX207D outputs (I/O expansion):
PoE1 Proportional OUT 1 value
PoE2 Proportional OUT 2 value
PoE3 Proportional OUT 3 value
The labels are displayed only if the corresponding output is configured.
HOW TO SEE THE FOUR OUTPUT PERCENTAGE:
Enter the function menu
1. Use the UP or DOWN keys to select Pout.
2. Push SET key: the bottom display shows Pou1, the top display shows the output percentage.
3. Use the UP or DOWN keys to select Pou1, Pou2, Pou3; the top display shows the value (in percentage)
4. To exit the Hour function push MENU key or wait the timeout.
If the proportional output Pou1 - Pou2 - Pou3 are configured to drive an external relay, the display will show
0=relay off and 100=relay on.
9.16 READ-OUT OF THE PROBES CONFIGURED TO CONTROL SOLAR PANEL
Sol FUNCTION
Label involved in Sol function:
FCP1 Free cooling probe 1 temperature
FCP2 Free cooling probe 2 temperature
FCdF Free cooling differential
FCrL Free cooling water pump status
FCAn Free cooling analog output status
9.17 READ-OUT OF THE PROBES CONFIGURED TO CONTROL FREE COOLING
Sol FUNCTION
Label involved in Sol function:
SLPb Solar panel probe 1 temperature
To Next Page
Loading...
