Emerson Dixell XRB - Page 35

1592038420 XRB30-60-70-77CH EN v1.1 2021.09.15 XRB 35/38
FEATURES
DESCRIPTION
oA2
SPDT 8A,
250VAC
Resistive load 10A, 120/240Vac, 30K
cycles
Motor load 1/4HP, 120Vac, 30K cycles
Motor load 1/2HP, 240Vac, 30K cycles
Resistive load 8A, 30Vdc, 30K cycles
8(3)A, 230Vac, 100K
cycles
oA3
SPST 5A,
250VAC
Resistive load 5A, 120/250Vac, 30K
cycles
Inductive (general purpose) 5A,
120/250Vac, 30K cycles
Motor load 1.9FLA/11.4LRA,
120/250Vac, 30K cycles
Pilot duty 180VA, 250V, 30K cycles
5A, 230Vac, 100K cycles
oA4
SPST 8A,
250VAC
Resistive load 10A, 120/240Vac, 30K
cycles
Motor load 1/4HP, 120Vac, 30K cycles
Motor load 1/2HP, 240Vac, 30K cycles
Resistive load 8A, 30Vdc, 30K cycles
8(3)A, 230Vac, 100K
cycles
Relay Outputs
(optional, on request
only)
oA1
SPST 8A,
250VAC
Resistive load 10A, 120/240Vac, 30K
cycles
Motor load 1/4HP, 120Vac, 30K cycles
Motor load 1/2HP, 240Vac, 30K cycles
Resistive load 8A, 30Vdc, 30K cycles
8(3)A, 230Vac, 100K
cycles
oA1
SPST 16A
inrush,
250VAC
Resistive load 16A, 120/250Vac, 30K
cycles
Motor load 10FLA/60LRA,
120/250Vac, 30K cycles
16(8)A, 230Vac, 100K
cycles
Maximum ampacity
(common terminal 1)
16A
Display
3 digits, red LED, 14.2 mm high
Purpose of control
Operating control
Construction of
control
Incorporated control, intended to be used in Class I or Class II equipment
Approvals
R290/R600a: relays tested according to IEC EN60079:0 and IEC EN60079:15
IEC/EN 60730-1; IEC/EN 60730-2-9
UL 873
CAN/CSA C22.2 No. 24-15