1592038420 XRB30-60-70-77CH EN v1.1 2021.09.15 XRB 34/38
22. TECHNICAL SPECIFICATIONS
22.1 XRB30-60-70CH
Self-extinguishing PC/PC+ABS
Frontal 38x80 mm; depth 62mm
Panel mounting device in a 71x29mm panel cut-out
Indoor use only, type 1 enclosure (on request)
Front panel: IP65; Rear housing: IP00
According to the model: 24VAC, ±10%; 110VAC ±10%, 50/60Hz; 230VAC ±10%,
50/60Hz
24VAC: 3.5VA max; 110VAC or 230VAC: 3.5VA max
Terminal blocks /
Terminal
Connections
Plug-in or screw terminal block, wire section between 1 and 2,5 mm2
Max tightening force: 0.5 N*m for 5,0mm pitch
Real Time Clock: Data maintenance up to 6 months with lithium battery.
Other parameters: internal EEPROM.
3, non-condensing humidity
Ambient Operating
Temperature and
Humidity
0T60°C; 20-85 rH% (non-condensing humidity)
-10T60°C; 20-85 rH% (non-condensing humidity)
Shipping and storage
temperature
-25T60°C; 20-85 rH% (non-condensing humidity)
NTC: -40T110°C, resolution 0.1°C or 1°C (selectable);
PTC: -50T150°C, resolution 0.1°C or 1°C (selectable)
±0.7°C ±1 digit and relative to the full scale
4 NTC or PTC (configurable); Up to 2 voltage free contacts
HOT-KEY: MAX voltage allowed is 5 VDC.
DO NOT CONNECT ANY EXTERNAL POWER SUPPLY.
TTL standard available on 5-pin port (HOT-KEY connector); Maximum cable length
= 2m
Resistive load 16A, 120/250Vac, 30K
cycles
Motor load 10FLA/60LRA,
120/250Vac, 30K cycles
16(8)A, 230Vac, 100K
cycles
Resistive load 16A, 120/250Vac, 100K
cycles
Motor load 1HP (16FLA/96LRA),
120Vac, 30K cycles
Motor load 2HP (12FLA/72LRA),
240Vac, 30K cycles