1592038420 XRB30-60-70-77CH EN v1.1 2021.09.15 XRB 38/38
23. APPENDIX
23.1 TOOLS
23.1.1 X-MOD
The X-MOD is a motion detection sensor that allows to detect the proximity of
customers or service staff. 5Vdc power supply version must be used. The X_MOD
usage will disable the serial communication.
WIZMATE software, used in combination with the XJ485USB, allows to manage the
configuration of the controller.
The HOT-KEY is used for a quick and easy upload (from device to HOT-KEY) or
download (from HOT-KEY to device) of the parameter map. The 4K version must be
used (code DK00000100).
The PROG-KEY for XRB must used exclusively for FW updating (code
DK00000350).
23.1.5 USB TO RS485 CONVERTER
XJ485USB is an optically isolated converter with 2.5kV maximum voltage isolation
on data channels. It has a small plastic box with 2 indication LEDs, RX and TX, to
quickly monitor the network communication. Power supply directly from USB port.
To Previous Page
Loading...
Need help?
General
