Emerson EL-O-Matic F Series - Section 3: Configuration Code; Understanding the Configuration Code

Configuration Code
Section: 3 Conguration Code
This section explains:
• How to create or read the conguration code for a actuator.
Type
FD Double Acting
FS Spring Return
Size
0012 Size 0012 0350 Size 0350
0025 Size 0025 0600 Size 0600
0040 Size 0040 0950 Size 0950
0065 Size 0065 1600 Size 1600
0100 Size 0100 2500 Size 2500
0150 Size 0150 4000 Size 4000
0200 Size 0200
Rotation angle
N 90° rotation angle
Threads
M Metric ISO 5211
U UNC/NPT/Imperial
Spring Set
00 Double Acting (no springs)
10 Spring Set 10 40 Spring Set 40
20 Spring Set 20 50 Spring Set 50
30 Spring Set 30 60 Spring Set 60
Rotation direction
CW Spring to Close/Clock Wise
CC Spring to Open/Counter Clock Wise
Pinion Material
AL High Grade Aluminium, Hard anodized
SS Stainless steel ASI 316 (+ A4-70 SS fasteners)
Valve Interface
(2
TN Standard ISO 5211 interface
SY Small interface with center plate (DIN3337)
LY Large interface with center plate (DIN3337)
Valve Stem Connection
Actuator
size
Square
Aluminum
Stainless
Steel
(4
Parallel
drive
Diagonal
drive
Star drive
No insert 000 Not applicable
0012
(3
9mm / 0.354" L09 D09 Q09
0025 11mm / 0.433" L11 D11 Q11
0040 &
0065
14mm / 0.551" L17 D14 Q14
0100
17mm / 0.669" D17 Q19
19mm / 0.748" L19
0150
17mm / 0.669" D17 Q22
19mm / 0.748" L19
0200 22mm / 0.866" L22 D22 Q22
0350
22mm / 0.866" D22 Q27
27mm / 1.063" L27
0600 27mm / 1.063" L27 D27 Q27
0950 36mm / 1.417" L36 D36 Q36
1600 &
2500
46mm / 1.811" L46 D46 Q46
4000
(3
55mm / 2.165" Q55 Q55 Q55
Temperature Range
S Standard: -20°C to +80°C (-4°F to +176°F)
H High: -10°C to +120°C (14°F to +248°F)
L Low: -40°C to +80°C (-40°F to +176°F)
G
(6
Standard: -20°C to +80°C (-4°F to +176°F) PED Group 1 Label
Visual Indication Code
K Standard (Knob)
N No Visual Indication
Finish
A Standard coating (EL-O-Matic Yellow)
G CSR Coating
Internal code 1
00 Standard
Miscellaneous options
XX Standard
H1 1/2" High Flow plate
P1 1/2" Porting according EN 15714-3 (only sizes 950-4000)
FS Full stroke adjustement
Notes:
See next page.
Installation, Operation and Maintenance Manual
DOC.IOM.EF.EN Rev. 7
September 2017
7
Section 3: Configuration Code
FS 0150 - N U 40 CW AL TN - NL19 S K A - 00 XX
Type
Size
Rotation angle
Threads
Spring set
Rotation
Pinion material
Valve interface
Miscellaneous options
Internal code 1
Color / nish
Visual indicator
Temperature
Valve stem connection