Emerson EL-O-Matic F Series - On-Site Storage

Before You Start
2
September 2017
Installation, Operation and Maintenance Manual
DOC.IOM.EF.EN Rev. 7
Section 1: Before You Start
1.3 On-Site Storage
• All actuators should be stored in a clean, dry warehouse, free from excessive vibra-
tion and rapid temperature changes.
• Prevent moisture or dirt from entering the actuator. Plug or seal both air connec-
tion ports.
NOTICE
Failure to follow the above guidelines (Warehouse and On Site Storages) will void warranty.